The best way to lead a horse is to use a lead rope that is at least three metres long. You should hook the lead rope in the middle of the ring under the horse’s ring. Then stand to the left of the horse’s head and grab the rope about 20 centimetres below this hook using your right hand. The remaining lead rope is held with the left hand. It is important not to wrap the lead rope around your hand so that you can let it go if necessary when the mount is frightened. If you already know that the horse is pulling the lead rope through your fingers or that it might be frightened, you should wear gloves to protect your hands.
Html code here! Replace this with any non empty text and that's it.
Our Top Lead Pick
Free time: Lead Video Guide
The appropriate handling of riding animals is always associated with risks. However, accidents when driving a horse can often be avoided with small tricks and habits. One such point is that you lead the horse with the lead rope. Often the right hand holds the rope directly at the halter, while the left hand holds the rest of the rope. There are dangers lurking. Numerous people hold the lead rope in a loop. If the horse stumbles or frightens and pulls at once on the rope, then the loop tightens. This can be particularly painful and can lead to serious accidents if the horse runs away in a panic. Because once the loop has tightened, the hand is crushed. So there’s no chance of getting off the rope. Worst case scenario, you get dragged along. This often increases the panic of the mount as well. Such accidents can be prevented by simply folding the lead rope within the left hand instead of taking it to a corresponding loop. If the mount pulls on the folded rope, it pulls the lead rope out of its hand in the worst case. However, the hand can by no means be caught in this loop. You just have to get used to holding the lead correctly. Next time you should pay attention to how you take the rope when leading the horse. If you first hold the lead rope in a loop, it is often sufficient to hold the rope correctly a few times so that you get used to it. Acquiring a lead ropeIf you want to do ground work or lead the mount far, you need an excellent lead rope. This is clearly different from the lead rope, which is called the tether rope. For ground work, a lead rope should have a length of at least three metres, preferably four. So the horse does not pull the lead rope out of your hand immediately if it jumps or climbs away. This rope should contain a carabiner and not a panic hook. Panic hooks can be accidentally released when a train is being pulled, which can have unpleasant consequences. Moreover, with the help of a panic hook it is by no means possible to jerk on the rope to give his mount a parade. Then, depending on the construction, the closure would possibly open. The material should be leather or cotton. Plastic lead cords do not cause pleasant burns if the mount pulls the cord through the hands accordingly. For the same reason it is important that the lead rope does not contain any knots, loops or patches. You can get caught on such obstacles and get hurt. You should make sure that the lead rope is thick enough. A cord that is a little thicker simply lies better in the corresponding hand than a particularly thinner one. A thin lead rope also cuts into the respective hand when the mount pulls on it. Two to three centimeters average are best for such a lead rope.