Best Wood glue

  • Easy-to-use, water based adhesive with Gorilla holding power
  • Best for building, carpentry or hobby projects using any...
  • Complete Projects Faster; Requires only 20 - 30 minutes of...
  • First one-part wood glue to pass ANSI Type II...
  • Designed for exterior use
  • FDA approved for indirect food contact
  • First one-part wood glue to pass ANSI Type II...
  • Designed for exterior use
  • FDA approved for indirect food contact
  • Crystal Clear
  • Non-Foaming
  • Water Resistant
  • No dripping
  • Replaceable tips
  • Wide mouth for easy filling
  • Non-toxic, no harmful fumes and easy to clean up with water
  • Painted formula delivers superior bond strength and...
  • Resists heat, mold and mildew

Our Top Wood glue Pick

Gorilla Wood Glue, 8 ounce Bottle
  • Easy-to-use, water based adhesive with Gorilla holding power
  • Best for building, carpentry or hobby projects using any type of wood
  • Complete Projects Faster; Requires only 20 - 30 minutes of clamp time, fully cured in 24 hours
  • Use Indoors or Outdoors; Passes ANSI/HPVA Type II water resistance
  • Versatile; Ideal for use on hardwoods, softwoods and natural wood composites

DIY articles: Wood glue Video Guide

Wood glue is an adhesive that is produced from either natural or synthetic materials. It can, for example, be helpful in gluing wood and other wood-based materials. If used correctly, wood glue is harmless to health and can be used without concern by consumers. However, it should be kept safe from children to avoid a possible risk of ingestion. The wood glues can be used for various jobs and are available in several stress groups. Group B1 and D1 of wood glues, for example, can be used very well indoors at a moisture content of less than 15 percent. Group B2 or D2 can also be used indoors. The moisture content of the wood can reach about 18 percent and the short-term effects of water and condensation water can be achieved. For the third group B3 and D3, attention must be paid to an interior area which allows short-term exposure to water and high humidity. The wood glue of this group can also be used very well outdoors. The last group of wood glues is group B4 and D4. These wood glues are often used indoors, which is familiar with the prolonged effects of condensation. Group B4 and D4 can be used outdoors in all weather conditions.

One of the most common types of glue is casein glue. In this modern type of glue, the slaked lime is mixed with casein and processed into a natural glue. It contains waterproof properties and has proven to be very heat resistant. Nowadays casein glue is often used in building joinery and it is hard to imagine this area without it. It can be acquired in exposure groups D2 and D3. During production, care should be taken to ensure a balanced mixing ratio between water and powder. Modern production is based on the mixing of low-fat quark and slaked quark. The ratio should be about 5 to 1. The casein glue can be stored for up to two years. Successful processing can take place, for example, in a glass, earthenware or porcelain vessel. However, the metal containers are not suitable for the preparation. The casein glue can absorb the water very quickly and well and produce a solid paste in a short time. After successfully mixing the two ingredients, the casein glue should be left to stand for some time. After 1/4 to 1/2 hours a viscous substance is formed, which is also called calcium caseinate. The hardened glue does not become liquid again by the addition of water and should therefore be produced with caution and under no circumstances for stock. With some additives, the casein glue, when prepared, can remain spreadable for a maximum of eight hours. The service life can be increased by cold setting. The successful and effortless application of the wood glue is best achieved with a spatula or high-quality roller. For best results, the wood glue should be applied to both woods at the same time. Already after ten minutes the first layers of the wood glue can be seen. A pressing time of up to 1 1/2 hours must be expected when gluing untensioned wooden parts. The tensioned joints must be pressed for up to 6 hours. The casein glue can leave very strong stains on the wood, so that it is rarely used in visible places. Other well-known wood glues include polyurethane glues, low-formaldehyde dispersion glues, low-formaldehyde polycondensation glues, phenol-formaldehyde resin glues, resorcinol-formaldehyde resin glues and urea-formaldehyde resin glues.













The wood glue is processed and produced very differently by the manufacturers. It should be noted that the application of wood glue to wood and other materials may cause stains and discoloration. The wood glue can be applied on one or both sides. Some surfaces require double glue application. The suitable room temperature for the application of wood glue should always be 18°C to 20°C. The optimum humidity must be between 50 and 70 %. The joint parts should be fitted and compressed within eight to ten minutes. An optimum glue application quantity for surface gluing is between 80 and 140 g/m².

TOP 5 Wood glue Bestseller

Gorilla Wood Glue, 8 ounce Bottle
  • Easy-to-use, water based adhesive with Gorilla holding power
  • Best for building, carpentry or hobby projects using any type of wood
  • Complete Projects Faster; Requires only 20 - 30 minutes of clamp time, fully cured in 24 hours
  • Use Indoors or Outdoors; Passes ANSI/HPVA Type II water resistance
  • Versatile; Ideal for use on hardwoods, softwoods and natural wood composites
Titebond 5004 II Premium Wood Glue, 16-Ounces
  • First one-part wood glue to pass ANSI Type II water-resistance
  • Designed for exterior use
  • FDA approved for indirect food contact
  • Excellent sandability
  • Ideal for radio frequency (R-F) and hot press gluing systems
Gorilla Wood Glue, 4 ounce Bottle
  • Easy-to-use, water based adhesive with Gorilla holding power
  • Best for building, carpentry or hobby projects using any type of wood
  • Complete Projects Faster; Requires only 20 - 30 minutes of clamp time, fully cured in 24 hours
  • Use Indoors or Outdoors; Passes ANSI/HPVA Type II water resistance
  • Versatile; Ideal for use on hardwoods, softwoods and natural wood composites
Elmer's E7310 Carpenter's Wood Glue Max, Interior/Exterior, 16 Ounces
  • Non-toxic, no harmful fumes and easy to clean up with water
  • Painted formula delivers superior bond strength and stainability
  • Resists heat, mold and mildew
  • 16 ounce bottle of extra-strength wood adhesive
  • Bonds stronger than wood
Titebond III Ultimate Wood Glue, 16-Ounces #1414
  • This product is a wood glues
  • Waterproof formula that cleans up with water, unaffected by finishes
  • Superior strength - strong initial tack, designed for interior and exterior applications
Rate this post