Best algaecide

Algizig can be easily and quickly applied in a swimming pool or swimming pool. The green or brown bath water is a clear sign of the presence of algae in the water. Bad limescale and slimy walls on the pool and other contaminants can form and get worse with time. To successfully and quickly remove the algae from the water, various methods can be used. For proper use, the first step should be to clean the filter and backwash the filter. Then the algae coverings can be whirled up with the pelvic brush. The next step is to measure the pH and immediately correct it for the wrong values. Thereafter, the effective shock chlorination can be performed and a flocculant added to the bath water. Now the filter system can be run for at least 24 hours. The pool wheels must be cleaned together with the floor with the cleaning robot. Thereafter, the backwash of the filter must be applied again. Finally, the double dose of algicide should be added to the bath water. The condition of the water should now improve significantly and clarify. Swimming in the pool should take place only with well-cleaned and clean bath water, as a lack of hygiene can lead to poor health. Under no circumstances may be bathed in green, dirty or gray water. Children should always be supervised by adults at the swimming pool.

The purchase of Algizid can be done in a well-stocked specialty store or from home via an online platform. When shopping in the online store, the item is delivered directly to your door and can often be done without further shipping. A very good product is the PoolBest algae prevention extra with three liters content. The product is also available in other sizes and can be selected by the consumer as desired. Canisters and bottles of 1 liter, 3 liters, 5 liters, 10 liters and 20 liters are available. The article is a highly concentrated and foam-free algae preventive, which triggers a clear effect and is present in liquid form. The PoolBest Algae Preventer contains no chlorine and is one of the best algae control agents that contain a long-term effect and are very successful against the algae and kill them. The benefits of the product include its long-lasting and effective effectiveness, high content of active ingredients, unique and very high quality, excellent and tested skin compatibility and chlorine and heavy metal free. The application of the PoolBest algae prevention extra can be done quickly and easily. In this case, the product must be added in the vicinity of inlet nozzles, so that a good mixing can take place. Before using for the first time, the operating instructions with the product information should always be read thoroughly. For the first addition, approximately 50 to 100 ml PoolsBest Algae Preventers should be added per 10 m³ of water. In a subsequent dosing can be given significantly less. In one week per 10 m³, about 20 ml of the PoolBest algae prevention agent in the indoor pool and 40 ml PoolBest algae prevention agent can be added to it in a free basin. If the water already contains many algae, a shock treatment with 100 to 150 ml per 10 m³ must be done with the PoolBest algae prevention extra. In heavy rain, high temperatures, slippery slips and a strong bathing operation, the double addition of the PoolBest seaweed warden must take place extra. The product has been sold online since 2010 and has enjoyed great popularity ever since.