Best Brake lever

  • FULL ALUMINUM ALLOY: Made of full aluminum alloy, it is very...
  • LIGHT WEIGHT: Light weight brake levers, will not add too...
  • EASY TO INSTALL: Easy to install with hexagon screwdriver,...
  • JAKIELAX 1 pair of bike brake levers included.Installed on...
  • Installation:First,remove the handlebar grip,adjust the...
  • This pair of high hardness aluminum alloy bike brake levers...
  • Premium material ensures lasting and practical use.
  • Bicycle brake is a must-have accessory for bike, easy to...
  • Universal children bike brake lever which suits for 2-2.3 cm...
  • Fit for 2.2cm diameter handlebar, suitable for mountain...
  • 2.5-finger designed levers fit most people,also for...
  • Light weight brake levers, will not add too much burden to...
  • Made of aluminium alloy, high strength and durable.
  • The bike brake levers fit installed on 22mm/0.87inch...
  • Installation:First,remove the handlebar grip,adjust the...
  • Fit for 2.2cm diameter handlebar, suitable for most mountain...
  • Long 4-finger designed levers fit most people. Length:17cm...
  • Anti-slip design.Made of aluminium alloy, high strength and...

A brake lever is one of the most important components of any bicycle or motorcycle. This component initiates the braking process or even makes it possible in the first place. The following lines explain what a brake lever is, what you should look out for when buying it, and what other tips and tricks there are for brake levers. What is a brake lever? A brake lever is a mechanical component of a brake system on a vehicle. It is mainly fitted to a bicycle handlebar or a motorcycle handlebar. If the driver pulls the lever in his direction, the braking process is initiated. A distinction is made between hydraulic and mechanical brake levers. In the case of a hydraulic brake lever, the pressure is transmitted to the brake pistons via the hydraulic lines by means of master cylinders. Mechanical brake levers, on the other hand, transmit the force directly, for example by means of a wire rope or Bowden cable. Different brake levers are offered for each vehicle type, i.e. for bicycles such as mountain bikes, racing bikes, or trekking bikes, or for motorcycle tourers, super sportsmen, motocross machines. Due to their shape, these are individually designed for operability in the respective field of application.

Our Top Brake lever Pick

Timoo Bike Brake Levers Aluminum Alloy Bicycle Brake Handle for Mountain Bike, Road Bike, Folding Bike, MTB, 2.2cm Diameter, Black
  • FULL ALUMINUM ALLOY: Made of full aluminum alloy, it is very hard and thick, resistant to collision and not easily deformed.
  • LIGHT WEIGHT: Light weight brake levers, will not add too much burden to your bike, keep your bike's balance performance.
  • EASY TO INSTALL: Easy to install with hexagon screwdriver, finish the installation of 2 brake handles in 5 minutes.
  • WON’T FADE: Stubborn digital paint, not easy to fade or crack even if it falls or collides.
  • GOOD SPRING: There is a good quality spring, when you release the handle, it can quickly return to its original position.

Bicycle & E-Bikes: Brake lever Video Guide

The brake lever is always mounted on the right, regardless of the type of vehicle. The word handbrake lever or brake lever is often used as a synonym for brake lever. Adjusting the brake leverA brake lever must always be adjusted to the individual requirements. Especially with motorcycles the adjustment is important, because due to the high speeds often milliseconds decide about an accident or a timely braking. Care should be taken to ensure that the fingers are able to operate the lever without detours and without reaching back. An ideal setting is when all five fingers of the “braking hand” and the forearm of the driver form a straight line. The adjustment itself is usually done by loosening a small screw. On some motorcycles the adjustment is also made by means of a setting wheel. The setting should therefore be possible by any layman. If the brake lever simply cannot be adjusted to your own hand, you can reorder a suitable model from a retailer. Maintenance of a brake leverThe brake lever should be serviced regularly. This applies in particular to the mechanical variant. First of all, all brake components should be cleaned and checked for wear or cracks. Then the Bowden cable should be unhooked, if available, and the pivot point of the brake lever and the locking device should be carefully oiled. The oil can now spread a little. After a few minutes the brake lever should be operated several times. The pivot point of a hydraulic brake lever should also be regularly lubricated and checked. The maintenance has been carried out successfully. What to look out for when buying a brake leverFirst of all you should look out for compatibility between brake lever and brake caliper. It may happen that the pull ratio of the brake cable is not compatible with the brake lever. Otherwise, care should be taken to ensure that branded goods are purchased. In particular with safety-relevant components, such as a brake lever, one should be sure that it performs its duty without any problems even in dangerous situations. Otherwise there may be bad surprises. Furthermore, high-quality brand manufacturers always have the advantage of a longer warranty including good support. When purchasing a motorcycle brake lever, it is essential to ensure that the component has an ABE (general operating permit). Otherwise the registration for the motorcycle could be invalid.

TOP 5 Brake lever Bestseller

Timoo Bike Brake Levers Aluminum Alloy Bicycle Brake Handle for Mountain Bike, Road Bike, Folding Bike, MTB, 2.2cm Diameter, Black
  • FULL ALUMINUM ALLOY: Made of full aluminum alloy, it is very hard and thick, resistant to collision and not easily deformed.
  • LIGHT WEIGHT: Light weight brake levers, will not add too much burden to your bike, keep your bike's balance performance.
  • EASY TO INSTALL: Easy to install with hexagon screwdriver, finish the installation of 2 brake handles in 5 minutes.
  • WON’T FADE: Stubborn digital paint, not easy to fade or crack even if it falls or collides.
  • GOOD SPRING: There is a good quality spring, when you release the handle, it can quickly return to its original position.
Bicycle BicycleStore 1 Pair Universal Aluminum Alloy Brake Handle Mountain Road Bike Brake Lever Diameter 22mm(Black)
  • JAKIELAX 1 pair of bike brake levers included.Installed on 2.2cm diameter handlebar
  • Installation:First,remove the handlebar grip,adjust the screw,make screw gaps and brake handle cracks be line;Second,clench handlebar,let the hammer head of brake line into the corresponding line hole and then chucking;Third, close the lever,tighten the screws,install handlebar grip
  • This pair of high hardness aluminum alloy bike brake levers is durable and cool
  • Super light and don't burden strength to your bike
  • Suitable for many kinds of bicycles
Bike Brake Levers FOMTOR Universal Aluminum Alloy Brake Handle 2.5 Finger for Mountain Bike, Kids Bike, Folding Bike, MTB BMX (2.2cm)
  • Fit for 2.2cm diameter handlebar, suitable for mountain bike, Kids bike, Fixed Gear Bike, MTB, BMX etc.
  • 2.5-finger designed levers fit most people,also for children.1 pair of bike brake levers included.
  • Light weight brake levers, will not add too much burden to your bike, keep your bike's balance performance.
  • Made of aluminium alloy, high strength and durable.
  • Very easy to install.Smooth enough to make you feel more comfortable.
Tebery Universal Full Aluminum Alloy Bicycle Brake Handle for MTB/BMX Road Bike Brake Lever 2.2cm Diameter(A Pair)
  • Made of aluminium alloy, high strength and durable.
  • The bike brake levers fit installed on 22mm/0.87inch diameter handlebar,suitable for many kinds of bicycles.
  • Installation:First,remove the handlebar grip,adjust the screw,make screw gaps and brake handle cracks be line;Second,clench handlebar,let the hammer head of brake line into the corresponding line hole and then chucking;Third, close the lever,tighten the screws,install handlebar grip
  • Lightweight and don't burden strength to your bike.
  • Automatic lever position restoration provides quick recovery from the crash.
FlyD Bicycle handbrake Lever Universal handbrake Lever Mountain Bike Bicycle Brake
  • Made of aluminium alloy, heavy duty and ensure for a long time use
  • Lightweight and don't add any burden to your bike
  • Automatic lever position restoration provides quick recovery from the crash
  • Suitable for many kinds of bicycles
  • Black and red color classic wild, cool cycling, comfortable summer

More Topics in Cars,Motors & Bicycle: