Best Clamp tripod

  • Mini tripod head for 360 degree rotation can be adjusted to...
  • With Flexible gooseneck can be extended to the max 13.4...
  • Clamp opens to 1.8 inches wide for easy installation.
  • This camera clamp holder is spring loaded with 360 swivel...
  • It is easy to use and can clamp onto virtually anything in...
  • Mini-head can rotate 360 degrees,Can clamp on most light...
  • SmallRig Multi-function Double Ballhead 1138 is a...
  • It can mount monitor and LED Lights on the one end via...
  • It could be attached and detached from the monitor quickly...
  • 【Upgraded Version】Based on the pain points of similar...
  • 【Multipurpose Holder】The gooseneck phone holder is...
  • 【Easy to Install】Featuring an adjustable clamp base...
  • Mini-head can rotate 360 degrees,Can clamp on most light...
  • The strong clip can be installed to flash holder, base, TTL...
  • The strong clip main body is made of metal, sturdy and...
  • 11-inch mini magic arm, made of aluminum alloy & stainless...
  • Adjustable ball head design on both ends with standard...
  • Meshing teeth design in the middle, provide more stability...

A clamp tripod is a particularly compact and flexible tripod, which enables extraordinary camera perspectives. These are already available from 10 Euro. The expensive variants, however, usually reach up to a little over 40 euros. The clamping tripods allow unhindered photographing while driving, as they can be easily attached to both the car and the bicycle.

Our Top Clamp tripod Pick

Smatree® Ajustable Jaws Flex Clamp Mount With 13.4" Gooseneck Extension for GoPro Hero 5/4/3+/3/2/1/Session/for Ricoh Theta S, M15 Cameras/for Compact Cameras
  • Mini tripod head for 360 degree rotation can be adjusted to get different best angles.
  • With Flexible gooseneck can be extended to the max 13.4 inches.
  • Clamp opens to 1.8 inches wide for easy installation.
  • Can be installed to most light stands, tripods, pipes or board etc.
  • Recommend to put the jaws flex clamp mount on a stable non-moving object, not on something that vibrates, or it's hard to maintain high quality picture effects.

Photo & Camera: Clamp tripod Video Guide

A clamping tripod is an unusual example of a tripod that offers flexible application possibilities. The individual models differ from each other in the type of mounting. For example, there is a clamping tripod for the bicycle, for the car window, clamping tripods with wall mount and clamping tripods with suction foot. All in all, clamping tripods have a low weight, which is why they are a perfect companion when travelling. With their help, breathtaking landscapes can be filmed or photographed while driving or cycling. They are used in all those situations where the surface is rather unusual, such as a wall or car window, so that a specific fixing capability is required. Because their design resembles a screw clamp. The special type of tripods that are attached to the car window are only suitable for lighter cameras. Otherwise, when mounting heavy DSLRs and DSLMs on round profiles and surfaces, you should consider purchasing a more robust metal clamping solution. The tree tripods or tree screws also represent a special type of clamping tripod. These are screwed into the wood using the sharp thread. However, it is advisable to use these tripods only on dead wood or on wooden posts. There are even tripods that are attached to conventional bottles, the so-called bottle tripods. Such tripods can be used well at parties.

The biggest advantage of clamp tripods is their flexibility. This enables him to fasten it. When purchasing, however, you should make sure that the selected model has a really good clamp holder, which is suitable for several surfaces. Another advantage is the low load capacity. However, the smartphone, the tablet, and a DSLM and DSLR camera must be just as easily attached to it. However, some tripods are only suitable for Iphones. If one chooses such a tripod, it is difficult to use another mobile device with it. Otherwise, the clamping tripods are always and everywhere an indispensable companion, which can be easily and comfortably stowed away and simply taken along. Ultimately, their low price is a good reason to become the owner of a clamp tripod. Either a compact table tripod with flexible legs can be selected, which can be used as a classic tripod as well as a clamping device, or one of the special forms. After all, you want to be prepared even for exceptional situations when travelling and have the opportunity to take the best possible pictures.

There are now a number of different manufacturers of clamping tripods. For example Joby, Hama, Manfrotto, SIRUI, CULLMANN, Walimex, Vanguard and Rollei. Recently, the GorillaPad tripods have been particularly popular among younger people because of their really high flexibility and fashionable design. The clamping tripods of this American manufacturer have flexible legs, which consist of a series of ball joints. Thanks to these, the ball elements can be brought into almost any position. This allows objects from different profiles to be clamped together. The rubber rings on the outer radii of the ball joints provide slip resistance.

Before buying a clamping tripod, you should first think about the situations in which the product should be used. If you like to travel, it is quite possible that a flexible model, which is fixed on surfaces, is sufficient. However, if you are a passionate cyclist and want to take pictures of landscapes during cycling tours, the selected product should definitely meet the requirements of this area of use. However, if a heavy camera is used, it should be borne in mind that clamping tripods are more suitable for mobile devices with a lower weight. Otherwise, other solutions must be considered. Otherwise, the clamping device is the most important decision factor, because it must be able to perform its work correctly. After all, the camera must also be securely and reliably fastened during all the fun.

TOP 5 Clamp tripod Bestseller

Smatree® Ajustable Jaws Flex Clamp Mount With 13.4" Gooseneck Extension for GoPro Hero 5/4/3+/3/2/1/Session/for Ricoh Theta S, M15 Cameras/for Compact Cameras
  • Mini tripod head for 360 degree rotation can be adjusted to get different best angles.
  • With Flexible gooseneck can be extended to the max 13.4 inches.
  • Clamp opens to 1.8 inches wide for easy installation.
  • Can be installed to most light stands, tripods, pipes or board etc.
  • Recommend to put the jaws flex clamp mount on a stable non-moving object, not on something that vibrates, or it's hard to maintain high quality picture effects.
SUPON Multi-Function Tripod Camera Clip Clamp Flash Holder Mount with 360 Swivel Photography Ball-Head 1/4" Threaded Screw for Camera Tripod, SLR, DSLR, Video Cameras,Studio Backdrop Camera
  • This camera clamp holder is spring loaded with 360 swivel ball head,tripod head 1/4"-20 threaded screw on top, fit for most DSLR SLR video cameras, studio backdrop cameras.
  • It is easy to use and can clamp onto virtually anything in your studio to provide you with flexibility to mount your camera wherever you need it most. This handy camera mount is great for everywhere, outdoors, sports, vacations
  • Mini-head can rotate 360 degrees,Can clamp on most light stands, tripods, pipes or board to mount photographic equipments. The strong clip can be installed to flash holder, base, TTL cord and flash trigger with standard screw hole.
  • The strong clip main body is made of metal, sturdy and durable,This clamp is specially designed to fit most Camera.and Widely used in the Camera.
  • Great for use with Tripod, SLR, DSLR, Video Cameras,Studio Backdrop to just about anything: car, boat, table, tree, bike ...for that group shot you want to be in, or the camera in movie mode, starring you.
SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - 1138
  • SmallRig Multi-function Double Ballhead 1138 is a multifunctional double ball head with a clamp at the bottom and a 1/4" screw on the top.
  • It can mount monitor and LED Lights on the one end via 1/4’’ screw, and it can lock the rod on the cage via the clamp tightened by the locking knob.
  • It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.
  • The rod clamp fits for DJI Ronin & FREEFLY MOVI Pro & all 30mm rods and can also be adjusted with ease.
  • The best load < 1.21kg
Gooseneck Bed Phone Holder Mount - Lamicall Flexible Long Arm Clip Clamp for Desk, Bendy Lazy Bracket Bedside Stand, Compatible with iPhone 11 Pro Xs Max XR X 8 7 6 Plus Samsung S10 S9 S8 Nintendo
  • 【Upgraded Version】Based on the pain points of similar products "Very shaky. Sag slowly after a period and can't keep a position for your phone any more", the arm of our gooseneck bed holder adopts better materials and design. It has improvements in both stability and durability. NOTE: the arm is not super flexible type, which aims to add stability.
  • 【Multipurpose Holder】The gooseneck phone holder is designed to: watch Netflix handsfree while laying in bed or sofa, use facetime with families on the desk, read recipes in the kitchen. And it also works as a tripod if you want to take time-lapse videos or take a photo with a friend.
  • 【Easy to Install】Featuring an adjustable clamp base varying from 0 to 2.36 inches (6cm), the cell phone clip holder can be securely mounted on the bed frame, bedside, headboard, nightstand, desk, end table and kitchen counter etc. Designed with a non-slip silicone base, the holder will not scratch the surface of your furniture.
  • 【Stable and Durable】As for the 33.4 inches (85cm) long arm, high- quality Aluminum-magnesium alloy solid core makes the lazy arm sturdy enough to hold his phone firmly, yet flexible to bend in any direction to accommodate your view. It will be a lifesaver for protecting you from neck pain.
  • 【Universal Compatibility】The 360 degree phone clip is compatible with 4-6.5'' devices, namely Nintendo Switch and almost all cell phones, like iPhone 11 Pro XS Max XS XR X 8 Plus 8 7 Plus 7 6S Plus 6S 6 SE, Samsung Galaxy S10e S10+ S10 S9+ S9 S8+ S8 S7 Edge Note 9 8, LG, Moto, Google Pixel, Moto etc.
Slow Dolphin Tripod Camera Clip Clamp Flash Reflector Holder Mount with 1/4 Inch Screw 360 Degree Swivel for Studio Backdrop Camera SLR, Digital SLR, Video Came(Black)
  • Mini-head can rotate 360 degrees,Can clamp on most light stands, tripods, pipes or board to mount photographic equipments.
  • The strong clip can be installed to flash holder, base, TTL cord and flash trigger with standard screw hole.
  • The strong clip main body is made of metal, sturdy and durable,This clamp is specially designed to fit most Camera.and Widely used in the Camera.
  • It is easy to use and can clamp onto virtually anything in your studio to provide you with flexibility to mount your camera wherever you need it most.
  • Just attach it to your camera or flash cold shoe via the tripod screw mount and clamp it wherever you need.