Best pool maintenance

The water treatment in a swimming pool can be done either physically or chemically. To physically treat the water, a recirculation and filtration system must be purchased, for example, the model gr-tech Instrument® swimming pool circulation filtration tool pool pump wastewater suction device 1.5 hp 220 V. Such a system consists of a filter and a circulating pump. The job of the pump is to move the water through the pool to filter out of the water small particles that can cause water turbidity. The water should be circulated at least twice a day. When selecting the filter system, it is essential to pay attention to the switch-on time specified by the manufacturer. The filter can be a cartridge filter, for example the product Intex cartridge filter unit, type ECO 3800, gray, 3,785 l / h / 99 W / 230 V, or a sand filter, for example the model sand filter unit 10 m³ / h. Regardless of which filter system is selected, the filter must be cleaned at regular intervals. The filter cleaning is therefore absolutely necessary because otherwise turbid particles are returned to the pool water. Cartridge filters are offered with a special cleaner, which makes the cleaning process quick and easy. In contrast, a sand filter is cleaned by means of backwashing of dirt particles. Pool owners who have filled their pools with fresh tap water are wondering if it is even necessary to treat the bath water in addition. The reason why water treatment has to be done in this case is that the water in small basins heats up quickly, giving germs and bacteria perfect conditions for development. Failure to take timely countermeasures will cause bacteria to multiply explosively. This means that the number of bacteria in pool water can increase to 20 million in just eight hours and 160 million in nine hours. Therefore, it is imperative to reprocess the spa water afterwards. The chemical water treatment can be done either by means of bromine, for example with HTH SPA chemistry bromine tablets (1.0 kg) or by means of chlorine, for example with the product 10 Kg – PoolsBest® Chlorine Multitabs 5in1, 200g Tabs. These two chemicals kill off all water-borne microorganisms reliably and also act as oxidants that remove dead germs, bacteria and other pollutants from the swimming water. After the water has been prepared as described, the chemical balance of the water values ​​(calcium hardness, total alkalinity and ph value) must then be adjusted. To determine the total alkalinity, test strips, such as the product HTH SPA chemistry test strips (25 pieces), are excellent. With the product 100 test strips for chlorine / pH / algae protection test strips, test strips can be the chlorine content and the ph value easily determine in the pool. Algae can be killed quickly and safely with, for example, the product Pool Algae Preventer / Algae Killer 10.0 l – concentrated + foam-free. A water test set, such as the product POWERHAUS24 – 120 test tablets 60 x pH Phenol Red and 60 x DPD1 chlorine – incl. Measuring chamber, should always be kept in stock by every pool owner.

Regular cleaning tasks include the cleaning of the pool floor. For cleaning, various auxiliaries are suitable. The product POWERHAUS24 – 120 test tablets 60 x pH value phenol red and 60 x DPD1 chlorine – incl. Measuring chamber, with which the cleaning is carried out comfortably and quickly, is representative at this point. Organic materials, such as grass and foliage, must be removed regularly from the water surface. Proud pool owners, for example, should have the product Jago Pool Cleaning Set Swimming Pool Cleaner 3-piece handy.