Best Car Beverage Holder

  • PLEASE MEASURE BEFORE PURCHASING ! We want your Cup Adapter...
  • BIG FLASKS AND BOTTLES WILL NOW FIT IN YOUR CAR CUP HOLDER:...
  • LESS SPILLS: The upper cup is 3 1/8 inches deep to better...
  • 【Product Design】Cup holder design reasonably use the...
  • 【Size Details】 Two cups base suit to put four size of...
  • 【Applicable Seat Type】The car cup holder is suitable for...
  • ✺ PORTABLE ORGANIZER- The Zento Deals Food Drink Tray...

  • ✺ CONVENIENT - The Zento Deals Food Drink Tray will...

  • ✺ DURABLE- The Zento Deals Food Drink Tray is made of...

  • Easily adjust to hold almost any size bottle, can or mug
  • Mounts with tapes or screws
  • Folds up for compact storage
  • These are big cup holders so please see all measurements in...
  • The LEDGE is made of smooth, sturdy plastic and has a 4”...
  • The window insert/tab inserts snugly between the (interior...
  • ►IMPORTANT NOTICE:headrest holder can only be properly...
  • ►PRACTICAL:This Faguan foldable car tray is a most...
  • ►PERFECT BACKSEAT ENTERTAINMENT:Let your child or other...

Where to go on the way to work with the newly acquired cup with a hot coffee to go? Or with the beverage can on your way on holiday? A practical cup holder is the ideal solution in both cases. Although many new cars are equipped ex works with one of the useful holders for cans, cups and small bottles, unfortunately not all of them. But if you need one, you can also buy a drink holder for retrofitting in the accessories trade and install it in your car in just a few simple steps. Most models can be easily mounted on the ventilation grilles without tools. For drivers in particular, the ventilation grilles above the centre console are the ideal mounting point for a cup holder in many vehicles. At this point, cans and coffee mugs are always within reach and can be grabbed without looking off the road. But even those who prefer a different mounting location for the cup holder will quickly find what they are looking for in the wide range of different cup holders. Today there are cup holders for the centre console, the footwell and for hanging in the door.

The Wicked Chili cup holder is a typical cup holder for mounting on the ventilation grilles. The holder can be adapted to the different diameters of cans and cups and offers a stable hold for cans with 0.25 to 0.5 litre contents as well as coffee cups and thermo cups. Due to the open construction, the beverages can be cooled within certain limits in summer by the air flow of the vehicle ventilation and kept warm in winter. The BESTEK KFZ multifunctional ventilation holder is a practical combination holder for drinks and smartphones. The width of the holder can be adapted to the different diameters of cans and cups and also offers a holder for different smartphones. With clamps in three sizes, the holder can be used on almost all ventilation systems with horizontal grilles. Some vehicles also have a drinks holder on the centre console between the front seats. These cup holders usually also offer space for at least two cups or bottles and further storage space for all kinds of small parts. Even with a cup holder on this pedestal, the drinks are always ready to hand and safely stored. The INION KFZ beverage holder offers plenty of space for attachment to the centre console/passenger seat. Two places for cups, cans and bottles, a separate compartment for smartphones and small parts as well as several holders for writing instruments are available. The AEG Automotive 97253 Bordbar BK 6 is an interesting alternative to the conventional cup holders for the centre console. The AG Bordbar is cup holder, cool or warm box and armrest in one. With a capacity of 6 litres and a cooling capacity of 46 W, the box contents can be cooled down to 15 – 20 degrees below the ambient temperature. Power is supplied in the vehicle with 12 V or at home with the 230 V power supply unit.

Our Top Car Beverage Holder Pick

Smart Flask Car Cup Adapter with New Removable Sizing Ring and Fitting Sleeve, Fits Our 32oz, Hydro Flask 32 & 40oz, Nalgene 32oz and Most Other 32 and 40oz Flasks and Bottles. Measure to be Sure!
  • PLEASE MEASURE BEFORE PURCHASING ! We want your Cup Adapter to work for you. Please measure your bottle and cup holder. Fits best with Flasks, Bottles and Cups measuring 3 3/8 to 3 3 7/8 inches in diameter. Works best in cup holders measuring 3 3/16 to 3 7/8 inches in diameter.
  • BIG FLASKS AND BOTTLES WILL NOW FIT IN YOUR CAR CUP HOLDER: It will also accommodate that giant coffee cup you could never take in the car. Fits Hydro Flask, Nalgene, Kleen Kanteen, Simple Modern, Mira and most other 32 and 40 ounce wide mouth flasks and bottles.
  • LESS SPILLS: The upper cup is 3 1/8 inches deep to better hold your beverage container. 1-inch slot fits most coffee cups
  • SATISFACTION GUARANTEED: If it doesn’t meet your needs, contact us and we will refund your money and pay for you to send it back

Car Parts & Accessories: Car Beverage Holder Video Guide

The most popular drink holders for retrofitting are the holders for attaching to the ventilation grilles. Various users complain, however, that the holder and the beverage container in it strongly impair the cooling air flow of the air conditioning system, especially in summer. In addition, these beverage holders are only recommended for use as holders for closed containers or containers with small openings, such as coffee cups with lids or beverage cans. Due to the rigid attachment, the contents of open cups can be distributed in the interior during acceleration, fast cornering or sudden deceleration of the vehicle.

Another way to safely store beverage cans and coffee cups is to use cup holders that can be hung on the door or from the rear of the front seats. These cup holders offer a lot of space, are usually collapsible and quickly attached and removed again. The autotable offers a lot of space for the rear seats of Type S. The folding table is simply attached to the headrest of the front seat and has a cup holder and a folding bottle holder. The Reisenthel Road Bag Red by Reisenthel is not intended for the door or the seat. The bottle and drink holder is clamped under the doormat and can safely hold up to two 1 litre PET drink bottles. With the two carrying handles, the Road Bag can also be used as a small bag. A good cup holder is not only a useful accessory for every car. The safe and handy storage of cans, cups and bottles means that a cup holder also contributes a great deal to road safety. Among the many cup holders with different mounting options, there is certainly the right cup holder for retrofitting for everyone.

TOP 5 Car Beverage Holder Bestseller

Smart Flask Car Cup Adapter with New Removable Sizing Ring and Fitting Sleeve, Fits Our 32oz, Hydro Flask 32 & 40oz, Nalgene 32oz and Most Other 32 and 40oz Flasks and Bottles. Measure to be Sure!
  • PLEASE MEASURE BEFORE PURCHASING ! We want your Cup Adapter to work for you. Please measure your bottle and cup holder. Fits best with Flasks, Bottles and Cups measuring 3 3/8 to 3 3 7/8 inches in diameter. Works best in cup holders measuring 3 3/16 to 3 7/8 inches in diameter.
  • BIG FLASKS AND BOTTLES WILL NOW FIT IN YOUR CAR CUP HOLDER: It will also accommodate that giant coffee cup you could never take in the car. Fits Hydro Flask, Nalgene, Kleen Kanteen, Simple Modern, Mira and most other 32 and 40 ounce wide mouth flasks and bottles.
  • LESS SPILLS: The upper cup is 3 1/8 inches deep to better hold your beverage container. 1-inch slot fits most coffee cups
  • SATISFACTION GUARANTEED: If it doesn’t meet your needs, contact us and we will refund your money and pay for you to send it back
EEEKit Car Seat Seam Wedge Cup Holder, Cell Phone Holder, Food Drink Bottle Mount Stand, Storage Organizer Multifunction Glove Box Car Accessories
  • 【Product Design】Cup holder design reasonably use the edge of the seat aperture, concise and beautiful. The car seat cup holder fit most car to provise more storage space, great for organizing items, such as cups, cell phone, pens and etc, meet the different needs.
  • 【Size Details】 Two cups base suit to put four size of the bottom of the cup: 86mm / 73mm / 68mm. [IMPORTANT] For more comprehensive and more intuitive dimensions, please click on the image (6th image ).
  • 【Applicable Seat Type】The car cup holder is suitable for which the seat is lower than center console/ the seat is same level as center console. Conversely, it is not suitable for the seat higher than center console. It suitable for the gap between 2-5cm.
  • 【Easy to Install】Simply slide the organizer between your seat and console for quick and simple installation.
  • 【Tips】 This type of product will occupy some room of the seat because it is used on the edge of the seat, but only a little bit, if you mind, please buy carefully. If you have any questions, please feel free to contact us.
Iokone Coin Side Pocket Console Side Pocket Leather Cover Car Cup Holder Auto Front Seat Organizer Cell Mobile Phone Holder
  • Adds Extra Storage – 2 Cup Holders & A Side Pocket. It can be used between front seats or front seat & center console.
  • Keeps itmes secure ,Can Store Many Items Such as Smartphone, Cup,Wallet, Cigarettes, Keys, Hand Cream, Coins, Gloves, etc.
  • Made of durable plastic and high quality leather,Keep Your Car More Clean and Organized .
  • Fit for most cars which without proper cup holders even Famous cars . We recommend buying a pair. So it can be convenient for you, or to facilitate family and friends.
  • Easy to use and closer to my body, seat wedge cup holder keeps your drinks and phone at your fingertips.
The LEDGE - The Best Auto Cup Holder, Cup Holder, auto Cup Holder, Large Drink Holder, car Door Cup Holder
  • These are big cup holders so please see all measurements in the pictures. See installation videos below. Contact info is included in shipment, please call if you have questions. The LEDGE patented design was made for bigger sized drinks, therefore it is sized accordingly. It SECURELY holds tall and top heavy 44-52oz+ sized drinks, 30-44oz ‘silver tumblers’, fat-bottomed sports bottles and more!
  • The LEDGE is made of smooth, sturdy plastic and has a 4” wide 'ledge' to keep your drink from toppling over while accelerating or braking. The 3” deep window insert/tab prevents it from popping out while in use.
  • The window insert/tab inserts snugly between the (interior door) window glass and rubber seal. Installation may take a little more effort and patience than expected, but it’s SO worth it! Videos are available on The LEDGE Facebook page and TheLedgeCupHolder website.
  • The LEDGE loves speed bumps, potholes and stop and go traffic! It will not fall off when opening or closing the door, however, liquid may slosh out of the drink opening of your cup, so use caution - especially with hot liquids.
  • The LEDGE is MADE IN THE USA! It only comes in black, but you can paint or decorate it to make it uniquely yours! (Do not paint any part that will be in contact with the window or vehicle interior or upholstery). Find and like us on Facebook and show us your LEDGE!

More Topics in Cars,Motors & Bicycle: