Best Jack

A car jack offers many advantages. Breakdowns often occur on country roads and there is no help in sight. Then it’s all the better if there’s a jack in the trunk. A conventional lift does not take up much space and is easy to operate. Thanks to the hydraulic technology, this is also possible without problems alone. The trolley is lifted so high that the tyre can be changed without much force. This saves the call to the breakdown service and a lot of waiting time. The biggest difference is in the type of hydraulic jack. A frequently used jack is the hydraulic scissor jack. It lifts a weight of up to 2 tons and can therefore also be used for heavy off-road vehicles. The lifting height for such a model is 18 to 80 cm. The spindle adjustment is available between 0 and 60 mm. The highest lifting height for such a lifter is completely sufficient and should be perfectly suitable for private use. Special tools with special properties are also available for workshops. They were developed rather for operational requirements and are high-quality processed. The spindle thread of a hydraulic jack is a practical addition, which allows the lifting height to be increased by one more piece.

In the area of load capacity, many models are available for vehicles weighing up to 2 tons. However, it is much more difficult to get a cheaper model for the heavier vehicles. However, a load capacity of 2 tonnes should not only be regarded as a weakness. After all, this load capacity is sufficient for almost all vehicles. A jack that can carry more weight is always much more expensive than the classic standard models. High-quality hydraulic jacks also create higher lifting heights. This is also necessary for some vehicles when changing tyres. Only for vehicles such as minibuses, vans or off-road vehicles does an expensive purchase make sense in any case. Especially when the annual change from winter to summer tyres or vice versa comes up to the drivers, then a lot of money can be saved if the change is carried out by the drivers themselves. A workshop is often very expensive and often mine gets an appointment in the distance. With your own jack, every driver is much more flexible. One of the most commonly used jacks is a shunting jack. As the name suggests, it is intended for manoeuvring vehicles. It is often used in professional garages as a professional device, but is also increasingly used by hobby mechanics. Such a jack is also very useful for the normal gasoline consumer. These are also devices with hydraulic technology. This technique has proven itself for many years and even beginners will have no big problems with it. The sturdy lever jack is simply moved from top to bottom, similar to an air pump for inflating air mattresses. This causes the device to gradually unfold and the vehicle to be pushed upwards. High-quality devices can be locked in the end position so that nothing can slip

In addition to shunting jacks, scissor jacks are also very practical. These models have a diamond shape. You’re lying on the floor with a corner. As the shape of this jack is very similar to a pair of scissors, it was called a scissor jack by many manufacturers. In most cases, this type of lift is only used in the private sector. A small physical effort is still necessary with this device. The vehicle is lifted piece by piece by a crank on the device. The biggest advantage of this device is the low lifting height and the relatively low price. Due to the low lifting height, a vehicle that is even lowered can be lifted. Another alternative is a balloon jack. It is often referred to as an air cushion car. It’s probably the most interesting way to lift a car. This is actually a kind of balloon. The exhaust fumes, which are trapped by the exhaust, can be used to pump out the unit effortlessly. It inflates until the vehicle has been lifted. The biggest advantage of this device is that the car can also be lifted on a sandy and soft surface. No matter where you are with a puncture, the jack can be used anywhere. The car jack is also used in the rally area. In the meantime, many private individuals have purchased such a jack, which hardly requires their own strength. Stock jacks are also hydraulic jacks. This is a stable car jack that has a cylinder shape. A kind of piston protrudes from the middle. This is moved hydraulically and lifts each vehicle effortlessly. The cane lifter is lightweight and therefore very flexible and practical. It does not take up much storage space in the vehicle. This hydraulic jack is available at a competitive price. Another alternative is a pneumatic lift. It functions electrically and is used by many workshops and logistics companies. It is connected to a compressor. This creates a high air pressure and the jack is able to lift even a vehicle weighing 20 tons.