Best Stream Pump

It does not always have to be a garden pond that expands the green oasis. Sometimes a simple stream creates a breathtakingly beautiful atmosphere. In the midst of many plants, a home-made stream seems quite natural. Who wants such a flair does not need a lot of accessories. Stream bowls in different sizes and of course the watercourse pump, which brings the whole thing to proverbial running. It is advisable to start planning the pond or creek as early as possible. Then a list with all accessories for the watercourse is created. Watercourse pumps have a sturdy housing and can be completely submerged. Depending on the model, they work very sparingly and do not consume much energy. The Pontec filter and watercourse pump PondoMax Eco 5000 is suitable for removing coarse dirt up to 8 mm. Its delivery rate is impressive: 5000 liters per hour, with only 60 watts! An integrated thermal protection prevents overheating of the device. Overall, a very good performance, which is still topped with a power cable of 10 meters in length.

Ideal is the combination of pond and stream in one. Why? Because the moving water supplies the pond with the necessary oxygen. Oxygen is the basis for plants and animals to develop well and find an excellent habitat here. The decisive factor is always the amount of water, it provides information about how big the watercourse pump must be. If a too small pond pump is bought, the water does not get enough oxygen and could "tip over". This means that due to insufficient oxygen, a high proportion of algae forms, the water turns green and usually needs to be replaced. In a large pond, a water exchange can be very expensive. How is the size of a watercourse pump calculated? For this purpose, the minimum pipe cross-sections are initially calculated, for example as: up to 20 liters per minute = 25 mm (ie 1 "). The variant from 50 liters per minute 38 mm (1½ "). Furthermore, a pressure loss of the supply line with 0.4mWS must be calculated. The higher the amount of water that has to be carried, the more powerful the watercourse pump must be. In order to be able to calculate the suitable pump, there is an invoice: The width of the watercourse in cm x 1.5 liters / minute gives the necessary power liters / minute.

An important point to consider when planning from the beginning is the power source. The water system will not work without electricity! Therefore, the location for the pond should be chosen accordingly. Alternatively, an underground power line can be laid in advance, which finds its conclusion in an energy column for the garden.